We agree to provide you an environmental tune-up and professional cleaning designed to reduce energy usage, improve equipment performance, prevent breakdowns and extend equipment life semi-annually.

Key Benefits: Extended equipment life Improved equipment efficiency Lower utility bills Priority customer service Improved equipment capacity Lower molds and mildews blowing through your home 15% DISCOUNT ON ALL REPAIRS Agreement is always transferrable Inflation protection up to 3 years Never pay a diagnostic fee on covered equipment Never pay overtime rates Extended warranty to 2 years on all service repairs

Environmental Benefits: Reduced combustion emissions Reduced power plant emissions Healthier indoor air Less bacterial growth Lower gas usage Lower electrical usage

Our 24-point Bi-annual Inspection Includes:

Clean Burner Assembly to improve combustion, reducing waste heat

Tune Burners for more efficient burns, saving energy

Clean Ignition Assembly to ensure reliable operation on demand

Clean & Inspect Furnace Heat Section to ensure safe operation and the absence of cracks from metal fatigue

Verify Flue Draft to ensure dangerous gas by-products are properly venting to the outdoors and flue pipes are free from obstruction

Inspect Flue Pipe to ensure no corrosion is present which can lead to cracks and the introduction of dangerous fumes into your home

Calibrate Thermostat for accurate control and to prevent system from running longer than necessary, increasing utility usage

Test Refrigerant Charge to ensure optimum levels leading to lower utility usage and extend compressor life

Test capacitors to ensure reliable operation and continued compressor and motor protection

Test Crankcase Heaters to ensure proper compressor protection.

Inspect & Test Controls & Safeties to keep operating costs low and prevent failures.

Adjust Fan Switch to prevent wasted energy and excess sound levels from nuisance cycling.

Test Pilot Safety & Ignitor to ensure reliable operation.

Clean Blower to maintain maximum efficiency and reduce molds and mildew.

Clean & Adjust Blower Assembly to extend motor life, improve air quality and reduce sound.

Check Air Flow to ensure proper air flow across the coil for proper humidity removal and reliable operation.

Visually Inspect Duct work to identify obvious leaks, which reduce system efficiency and increase utility expense.

Tighten Electrical Connections to ensure uninterrupted system operation.

Measure & Record Voltage & Amperage to identify baseline operating conditions.

Lubricate All Moving Parts to maintain efficiency and extend equipment life.

Clean Inside Evaporator Coil to restore heat transfer efficiency, reduce utility cost and improve air quality.

Clean Outside Condensing Coil to restore heat transfer efficiency and reduce utility cost.

Clean Condensate Drains to prevent water damage and the potential for mold formation.

Apply Protective Coating to outside and indoor unit to protect finish.

To get started, schedue a tune-up of your heating and/or air conditioning system and our technician will explain all the benefits of having a Universal Savings Agreement, or call us at (585) 328-9260. You can also request a service appointment via our online service appointment scheduling form.